Safewalk-Light Mat

Available Mat Colors - (Click Swatch For Larger Image)

↑ Back To Top

Full Specifications

Features:

• Provides better slip resistance than ceramic and cement floors
• Nitrile (Terra Cotta) rubber blend increases the resistance to oil and fats
• Low profile and molded edging
• Contains 15% recycled material

Technical Data:

• Material: SBR Rubber (Black) / Nitrile (Terra Cotta)
• Resiliency: 30 min per ASTM D2632
• Overall Thickness: 1/2" +/-

Additional Information:

• Sizes: 3' x 5', 3' x 10', 3' x 15', 3' x 20'
• Colors: Black, Terra Cotta
• Thickness: 1/2"
• Warranty: Total Confidence

↑ Back To Top

Certifications & Warranty Information

Crown Matting Technologies’ confidence in the design of our matting products and our ability to manufacture matting solutions with world-class quality and craftsmanship allows us to offer our Total Confidence Lifetime Warranty.

Our Total Confidence Lifetime Warranty means we stand behind our matting products for the lifespan of the product. Don’t be fooled. No mat is indestructible. Much like any flooring product, the lifespan of matting varies based on the product and environment/foot traffic patterns.

If any Crown matting product does not perform under the appropriate mat application/environment using the proper care outlined in our Clean & Care Instructions, we promise to replace it.

All M + A mats feature a Total Confidence Lifetime Warranty for the life of the product!

↑ Back To Top

Maintenance & Cleaning Recommendations

1. Vacuum Daily

• When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.

2. Routine Maintenance

• Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner
• In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service
• Failure to rinse the solvent can result in damage to the rubber backing of the mat
• Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose
• Following the use of this method, the mats should be placed in a position to allow them to drain
• This draining will occur rapidly and the mats will be ready to put back into service in a short time

3. Deep Cleaning

• Waterhog mats may be cleaned by any routine method used for carpeted floors
• This includes wet extraction as well as low moisture extraction methods
• Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible
• If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service

4. Floor Preparation

• Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned to remove dust and dirt
• This will allow the mat to grip the floor more effectively reducing mat movement with traffic
• The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement. Why does the floor get discolored underneath a floor mat?

↑ Back To Top