Waterhog Eco Elite Roll Goods Custom Logo Mat

Available Mat Colors - (Click Swatch For Larger Image)

↑ Back To Top

Full Specifications

Surface

• Fiber Type: 100% post-consumer PET Polyester fiber
• Weight: 30 ozs./sy.
• Nub Height: 3/8”
• Design: Herringbone

Logo Fabric

• Fiber Type: Polypropylene
• Construction: Needlepunched
• Fabric Weight: 52 oz/sy
• Pattern: Hobnail

Backing

• Type: 100% SBR Rubber (20% Recycled Content)
• Thickness: .190" Nubs, .050" Between Nubs
• Durometer: 60
• Tensil: 1400 PSI

Testing

• PassesFlammabilityStandardDOC-FF-1-70
• Anti-Static
• Certified Slip Resistant by the National Floor Safety Institute
• Not adversely affected by salt or ice melt
• Certified slip-resistant by the National Floor Safety Institute
• Recommended uses: Banks, malls, healthcare facilities, educational facilities and airports

↑ Back To Top

Certifications & Warranty Information

NFSI Certified Slip Resistant

In the marketplace, architects, designers, and specifiers are being educated to select products that are NFSI certified in high-risk areas. It is their assurance that the products have been clinically tested and meet the highest performance standards.

This is just another indication that Andersen is leading the industry with the highest performing, most innovative, and now the safest mats available.

100% CUSTOMER SATISFACTION GUARANTEE

Our 100% Customer Satisfaction Guarantee means that you can partner with FloorMatShop.com and the M + A Matting Company knowing that we will always stand behind our products and services.

In the mat industry, M + A mats are where design and function come together, where quality isn't compromised to meet a price point, and where solutions to your maintenance and decor problems come first.

All M + A mats feature a 100% customer satisfaction warranty for the life of the product!

↑ Back To Top

Maintenance & Cleaning Recommendations

1. Vacuum Daily

• When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.

2. Routine Maintenance

• Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner
• In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service
• Failure to rinse the solvent can result in damage to the rubber backing of the mat
• Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose
• Following the use of this method, the mats should be placed in a position to allow them to drain
• This draining will occur rapidly and the mats will be ready to put back into service in a short time

3. Deep Cleaning

• Waterhog mats may be cleaned by any routine method used for carpeted floors
• This includes wet extraction as well as low moisture extraction methods
• Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible
• If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service

4. Floor Preparation

• Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned to remove dust and dirt
• This will allow the mat to grip the floor more effectively reducing mat movement with traffic
• The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement. Why does the floor get discolored underneath a floor mat?

↑ Back To Top